Free home survey

Wilmslow · Stoves & fireplaces

Stoves and fireplaces in Wilmslow

Keep the features you love, compare the fire options and check the requirements for your Wilmslow address. Start the conversation at our Macclesfield showroom.

Plan a visit to the Macclesfield showroom ↗
Lit dark stove, pale marble surround and dark hearth; patchy wall finishing.
The Clock Sudbury alight within reclaimed marble. Wall finishing remains visible above the surround.

Keep the character, reconsider the fire

A fireplace can be the part of a Wilmslow room you most want to keep and still contain a fire you would like to change. Begin by separating those preferences. You may like the surround but want different controls, enjoy the proportions of the chimney breast but dislike the hearth, or want a new focal point altogether. Describing the individual elements makes it easier to compare realistic alternatives at the Macclesfield showroom.

Take a photograph of the full setting before concentrating on product details. Show the mantel, opening, hearth, nearby furniture and any television or shelving. Explain which elements are important and which are open to change. This creates a useful design brief without assuming that a retained surround will work with every appliance. Its condition, dimensions and relationship to the proposed fire all belong in the assessment before reuse is agreed.

Compare three possible directions

One direction is to retain much of the visible fireplace and investigate a suitable replacement appliance. A second is to keep one feature, such as a surround, while reconsidering the hearth and opening around it. A third is to start with a different fire format and redesign the setting. None of these is automatically the simplest option: existing construction, the chosen fuel and the installation requirements can change the work involved.

Try comparing these directions before comparing individual finishes. Write down what each would preserve, what would change and which practical questions remain unanswered. That is especially helpful if two members of the household favour different looks. Rather than arguing over a product photograph, you can discuss the room features each person values and ask the showroom which combinations are worth investigating. The final proposal should identify an exact appliance and a clear scope.

Check smoke-control boundaries before choosing solid fuel

Cheshire East Council identifies smoke-control areas within Wilmslow. That does not mean every Wilmslow address is covered. Check the council's map for your property and ask its air-quality team if the boundary is unclear. Keep the result with your project notes so the appliance and intended fuel can be considered against the right requirements. An existing fire or a neighbour's installation is not confirmation that your proposed combination is appropriate.

For the rules on authorised fuels and exempt appliances, use the current government guidance linked here. Ask about the exact model and the fuel you intend to burn, rather than relying on a broad description such as wood burner. Product suitability and correct use need to be considered together. The local installation guide develops the practical questions to raise when you are ready to move from comparing options to discussing the work.

Check the council's smoke-control map and guidance ↗Read the current government rules ↗

Look beyond a familiar fuel type

If you are replacing a fire, consider whether the existing fuel still fits how you use the room. Wood, multi-fuel, gas and electric options bring different daily routines and installation questions. Explain whether you expect to use the appliance frequently, how you feel about handling fuel and what matters about the controls. The appearance of a flame can be important, but it is only one part of living with the choice.

A change of fuel should be discussed as a project, not treated as a simple exchange of appliances. Describe the existing connection and what you know about the chimney or flue. Ask which parts require assessment and who is responsible for each element of the work. At the showroom, compare the functions of the particular models on your shortlist; a demonstration of one electric or gas fire does not describe every model in that category.

Explore the different fire types ↗

Use colour and texture to narrow the choice

A pale surround can make a dark fire frame more prominent, while a dark hearth may connect visually with the body of a stove. Judge those relationships alongside the room's floor, walls and furniture. Bring a small material sample where practical, or photographs taken in the room's usual light. A close product image can help you recognise a finish, but it cannot show how the whole combination will feel in your home.

The shop's Wilmslow project below records reclaimed marble around a Clock Sudbury with a honed granite hearth. Use it to discuss contrast and proportion, rather than as a specification to reproduce. In particular, a reclaimed element can have its own condition and dimensional limitations. Ask what needs checking before it is included in the design, and avoid ordering another component solely because its published width appears to fit the visible opening.

Check heritage status independently of smoke control

Smoke-control and heritage questions are separate. Cheshire East's conservation-area directory includes named Wilmslow areas such as Hawthorn Lane and Highfield, alongside St Bartholomew's and Styal entries. Use the maps to identify the relevant boundary rather than treating that list as a description of every Wilmslow property. If your building is listed, mention that explicitly when seeking advice about changes to the fireplace or its surroundings.

Keep a note of any council advice and describe the proposed work accurately, particularly where an exterior chimney or flue would change. If your initial design changes, check whether the earlier advice still addresses the revised proposal. You can then bring the confirmed constraints into the showroom conversation. It is easier to compare appropriate options when both the visual priorities and the property's restrictions are understood before materials or other trades are booked.

Find the relevant conservation-area map ↗

Move from ideas to a useful showroom comparison

Visit the Macclesfield showroom with a short list of the features you want to retain, photographs of the room and any model names you have saved. Ask to compare the details that matter to your decision, such as proportions, finishes and controls. If you are travelling for a particular display, telephone first. The showroom is on Hulley Road; the visitor page provides the full address, opening hours and directions.

For an installation enquiry, give your Wilmslow postcode and explain the proposed changes. The next conversation should clarify what needs assessment, which choices remain open and how the work would be described in a quotation. Use the installation guide for preparation and responsibilities, or the hearth and chimney pages if one of those elements is your main uncertainty. You can begin without selecting a stove or deciding to replace every part of the setting.

Prepare a Wilmslow installation enquiry ↗Find the Macclesfield showroom ↗

From the shop's project archive

Reclaimed marble and a new Clock Sudbury in Wilmslow

An old gas fireplace made way for a Clock Sudbury within a reclaimed marble surround. The work combined a new chamber and honed granite hearth with the pale stone setting.

Read the complete project story ↗

The photographs, in sequence

From gas fire to marble setting.

This sequence starts with the original gas fireplace. The next photograph records the work in progress; the installed view still shows wall finishing.

Original gas fire and pale surround; room protected for work.
01

The original fireplace

The gas fire and pale surround before removal, with the room protected ready for work.

Excavated opening and partly positioned marble elements.
02

Making room for the new setting

The opening after excavation, with exposed backing and marble elements being positioned. Work is still in progress.

Lit dark stove, pale marble surround and dark hearth; patchy wall finishing.
03

Marble, granite and a lit stove

The Clock Sudbury alight within the pale marble surround. The dark hearth is in place; wall finishing remains visible above the fireplace.

For your own fireplace

Think about the setting as well as the stove.

Bring photographs of the whole fireplace, including any surround you hope to retain or reuse. The showroom can discuss the opening, hearth and appliance together.

Explore Clock Stoves ↗

Before a first conversation

Bring the room into view.

Plan a showroom visit
Could an existing surround be part of the plan?

Show the team the surround and explain what you hope to keep. This project uses reclaimed marble; whether your own surround can be retained or reused needs an assessment of its condition and the proposed installation.

What should my room photographs include?

Include a straight-on fireplace view and a wider room view, with approximate opening, surround and hearth measurements. Show any visible damage or features you want to discuss.

Can the team help with my Wilmslow postcode?

Tell the showroom your postcode and a short outline of the work. Ask the team to confirm availability, the scope they can offer and the next step before planning an installation.

A simple first step

Talk through your Wilmslow project

Tell the showroom what is in the room now, what you hope to change and your postcode. Ask the team to confirm availability and the most useful next step.

Prefer to talk? Call 01625 402900.

1 of 2 · Your projectAbout a minute
Your project
How can we reach you?

Your details are used to respond to this enquiry. Privacy policy

Plan your project

Services for your Wilmslow home

Stove installation in Wilmslow Chimney lining in Wilmslow Fireplace hearths in Wilmslow

Macclesfield showroom

See the possibilities in Macclesfield

Bring your room photographs and compare finishes, proportions and fire formats. Call before travelling if you want to see a particular model.